New
Water quality monitoring. Know what the water is doing, every day.
Water gets tested now and then, and in between nobody knows what it is doing. Flowplan reads it every day, so you know the water is clean on the days nobody is testing it.
Trusted with +9,000 installations across 16 countries
Read every day, not now and then
Water gets tested every so often. Flowplan reads it every day in between, so there is no stretch where nobody knows.
Proof you can hand over
Every reading is kept for every machine, so you can show a customer their water has been clean all year.
Only when the water says so
A machine nobody used has water that barely moved. Flowplan knows that, so you are not sent out to a filter that is still fine.
Know what your water is doing.
Read the water, not the calendar
A small Beam sits on the line and checks the water every day. It sends the reading to you on its own, so there is no gap between tests where nobody knows.
Watch the number move
A clean line holds a steady reading. When the number climbs, something has changed in the water, and you see it the same day instead of at the next test.
Then the work plans itself
When the water drifts, Backoffice turns that into a job, and jobs near each other get done in one trip. Field Office gives your technician the route and the history for the day.
Show the customer their water
Every reading is kept for every machine and sent to the systems you already use, like Dynamics 365. So you can show a customer their water has been clean all year, and that nothing was changed it did not need.
How it works
Set it up once. It runs itself.
01Put a Beam on the water line. It clips on in an afternoon and starts reading the water straight away.
02It connects on its own. The Beam has its own mobile signal, so the readings come in with no Wi-Fi and no IT.
03You see the water every day. The reading comes in on its own, and when the water changes, that turns up in your week. Nobody has to set a date.
For water that has to stay clean.
Some water has to be spotless. If it slips, the tools do not come out clean or the lab result is wrong. Flowplan checks the water every day, so you catch it before that happens.
Sterilisers and autoclaves
They run on ultrapure water, and it is the water that cleans the tools. If it is off, they are not clean.
Labs and dialysis
A test or a treatment is only as good as the water behind it.
Pure-water systems
A reverse osmosis unit or a deioniser has one job, clean water, and this is how you know it still does it.
Ask us about your water.
You do not have to book a demo to get an answer. Tell us what you service and what you want to know, whether that is what a Beam would read on your machines, what it costs, or what it takes to fit.
Would rather talk to someone? Call us on +45 44 11 08 00 or write to info@flowplan.dk.
Water and filter companies already running Flowplan
The box that reads the water.
The conductivity sensor connects to a Beam 4.0 Pro and reports in µS/cm. It clips on in an afternoon and runs for years on one battery.
See Beam 4.0 Pro